Redundant Fiber Path Installation

Two paths. No shared infrastructure. Real redundancy.

A backup fiber path that shares conduit with your primary path isn’t redundancy — it’s a false sense of security. True redundant connectivity means geographically diverse routes, separate conduit infrastructure, and ideally different physical rights-of-way. When someone digs up the wrong street, only one path goes down.

We engineer and build genuinely diverse fiber routes. Not two cables in the same trench.

What Redundant Path Installation Actually Means

Two complete fiber installations between the same facilities — engineered to be geographically separate throughout their entire route. That means separate conduit systems, different street corridors where possible, diverse entry points into each facility, and independent splice and termination infrastructure.

True diversity is harder to achieve than it sounds. In dense urban environments, routes may converge at certain chokepoints (major river crossings, specific highway underpasses) where diversity isn’t physically possible. We identify these during route engineering and document them honestly — so you understand where your actual risk exposure is.

What's Included (Two Complete Paths)

- Diverse route survey and engineering — both paths
- Independent permit management for each route
- Separate conduit installation — no shared infrastructure between paths
- Diverse facility entry points
- Independent splice enclosures and termination panels
- OTDR testing for both paths — all fibers, both directions
- Route diversity documentation — clear mapping of where paths are separate and where they converge
- GPS-referenced as-built documentation for both routes
- Complete test reports

Timeline

Redundant path projects: roughly double the timeline of a single installation

Metro redundant paths: 20–35 weeks
Long-haul redundant paths: 40–70+ weeks

Paths can be built sequentially or in parallel (parallel is faster but significantly more complex to manage). We’ll recommend the approach based on your timeline and budget requirements.

FAQ

Common Questions

How diverse is "diverse"?

We document exactly how diverse each path is — which segments are truly separate and which converge (at river crossings, facility entries, etc.). You’ll have a clear map of where your redundancy is real and where there’s residual shared risk. We don’t oversell the diversity.

Is it worth building ourselves vs. using a carrier for one path?

Sometimes a hybrid approach makes sense — build one path for ownership and control, use a carrier’s path for the second. We’ll help you evaluate the options honestly. If carrier services provide adequate diversity for your requirements, we’ll say so.

Can the two paths be different fiber counts?

Yes. Primary and secondary paths don’t need to be identical. Often the primary path carries more fibers while the secondary is sized just for failover capacity. We design both paths to your requirements.